MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.

Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)

€59,00
Skip to product information
MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.
  • MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.
  • MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.
  • The easy grip locking wheel makes it extremely simply to seal with much less force than previous seals.
  • A duotight check valve is also a brand new feature for the KegLand MK5 regulator range. (USA is a threaded piece only)
  • Soft seal that is very difficult to overtighten and damage due to the regulator stem bottoming out.
  • The seat cap assembly, spring, washer and hex bolt cap are unassembled.
  • Simply by using the regulator knobs M8 hex fitting you can undo the back of the regulator to clean any debris or accidental liquid contaminant.
  • Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
  • Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
  • MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.
  • MK5 Regulator brought to you by KegLand is the first tool free regulator every designed.
  • The easy grip locking wheel makes it extremely simply to seal with much less force than previous seals.
  • A duotight check valve is also a brand new feature for the KegLand MK5 regulator range. (USA is a threaded piece only)
  • Soft seal that is very difficult to overtighten and damage due to the regulator stem bottoming out.
  • The seat cap assembly, spring, washer and hex bolt cap are unassembled.
  • Simply by using the regulator knobs M8 hex fitting you can undo the back of the regulator to clean any debris or accidental liquid contaminant.
  • Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
  • Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)

Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)

KL30670

€59,00
30+ in stock

Latest Features
1. One handed tightening to the Cylinder. No spanner / wrench is required to attach the Regulator to your CO2 Cylinder. You can easily attach it with the nut-hand-wheel with one hand.
This is due to a new spigot seal design that easily compresses without risk of damaging the seal or leaking. 

2. Self servicing maintenance without the need for a vice or specialised equipment. Now with the regulators internals being shrunk down and accessible from the back plate. You can now easily undo the area with the regulator knob that has an M8 Hex / Allen key head and clean out your regulator if you have a contaminant get in there. 

3. Output with Check Valve, Ball Valve & Integrated 8mm duotight push in.

4.  Triple scale Class 2.5 Gauges in kPa, Bar and PSI  (+-2.5% Accuracy)

5.  Brand new seat cap assembly design. The new seat cap is made of ultra high molecular polyethylene. That basically means from hardcore use and abuse that us homebrewers give regulators like force carbonating. The seat cap that is bouncing up and down is less likely to scratch and create brass finings that could otherwise cause pressure creep down the line from an internal contaminant going upstream.

6. Stronger Steel Gauges made from thicker steel

7,  Colour Coded PRV valves.  This unit comes with a 65psi Green PRV.  It does not come with a Red 35psi or Grey 100psi PRV

8. M6 Mounting Holes for easy Mounting. Please note, you will need to remove the nut-wheel as it will foul when mounting flat.

Options Accessories
New Gauge Guard Available (sold separately)

You may also like

Overall rating: 4.9210525 / 5 from 38 reviews.

AI Generated Review Summary

Summary topics

Review topics: [quality, delivery, design, regulator, upgrade, reg, idea, gauge, valve].

Review highlights

Reviews

Like how easy it is

"Like how easy it is to use my new Type 30-MK5 CO2 Regulatorfrom kegland no tools needed just hand tighten and push line into the duotight fitting 🤙🤙"

— Bruce S. (5/5)

Haven’t used yet

"Haven’t used yet, looks to be high quality. Fast shipping."

— Emma W. (5/5)

Game changer

"This was so easy to use. As a beginner to using CO2, it was easy to set up - just make sure you have the appropriate size 8mm tubing! The videos that have been made were also extremely helpful."

— Mark G. (5/5)

Mk 5 regulator

"Fantastic looking not using as now I have to save Up for CO2 bottle money hard to come byas on a pension"

— Bigox (5/5)

65psi ??

"And tool-free it was to get set up. Liked the ball valve on the delivery hose outlet. Mine came with a 100psi gauge which makes setting keg pressures in the low teens a bit hit and miss - why have a 100psi as the standard gauge? I enquired if KegLand sells a 65psi gauge that I can purchase. They said they don't sell that particular gauge as a standalone item, despite it being advertised on their Mk 5 regulator."

— Neil J. (5/5)

Nice.

"Was a good upgrade fr9m the MK 4 that started not allowing gas to flow."

— Drewski (5/5)

Type 30 - MK5 CO2 Regulator.

"Love this regulator, it's easy to mount, easy to read. Plus a built-in isolation valve and great maintenance features."

— Martin W. (5/5)

Not Compatible

"I really love the idea behind this tool-free option, but it is NOT compatible with 2kg CO2 cylinders with the molded protective collar which seems to be the standard in my area."

— Hannah (3/5)

MK5 Reg upgrade

"Some major improvements made over the mk4-love the tool free design, the built in check valve, etc. . defo worth the reg upgrade."

— Mark J. (5/5)

Type 30 - MK5 CO2 Regulator

"The Type 30 - MK5 CO2 Regulator will be the easiest regulator to install on a cylinder that you will ever buy."

— Damien R. (5/5)

Q&A

Hi, I was given one of these regs and it isn’t holding pressure (creep). Low pressure side rises quickly over a few seconds to over 60psi and the release kicks in. I have removed and refit the seat and spring. I’ve also removed and refit the diaphragm but the issue stays the same. Can you tell me if warranty covers this issue and if I should send in or try a diaphragm kit to solve the issue? Thanks.
That's pressure creep! You need to replace the diaphragm: https://kegland.com.au/products/mk4-regulator-replacement-diaphragm-and-seat-assembly